Base Microcement 10 KG.
€22.99
Two-component coating enhanced with synthetic cement-based materials. Adapted for commercial, administrative and residential spaces .It used to stabilize any surface prior to the application of Microcemento Fino
Mode of Use
Mix with component B (liquid) according to the required viscosity for each application until the desired texture is achieved.
Properties
High abrasion resistance
Water, grease, and oil impermeable
High mechanical resistance
Anti-slip
Stable against ultraviolet rays
Application
Apply with a trowel in layers of approximately 1mm
Technical Data
Type: Two-component polymer mortar
Appearance: Comp. A: Powder. Comp. B: Liquid
Colors: White
Density: 2.0 kg/dm³. pH: 12
Adhesion to concrete: At 28 days: > 15 kg/cm²
Mechanical resistance: Compression at 28 days: > 300 kg/cm²
Handling and Storage
Handling: Avoid dust formation
Storage: Keep out of reach of children
Specific uses: Avoid dust clouds during handling. If not possible, wear goggles and dust mask
Avoid direct contact with skin and mucous membranes
Base 10Kg.
Two-component coating enhanced with synthetic cement-based materials. Adapted for commercial, administrative and residential spaces .It used to stabilize any surface prior to the application of Microcemento Fino