Complete pack to cover 30 square meters of surface with microcement, for walls, with two layers of microcement base, plus 2 layers of fine microcement, sealants, primers, application instructions,
Total net weight (130 kg.)
This product is no longer in stock
The kit consists of:
25 KG of Fine Microcement
It is a fine-grain microcement, in which the last two colored coats are applied, and will give the final appearance before applying the sealing varnishes. It is applied with a trowel.
60 KG of Microcement Base
It is a coarse-grained microcement that serves as the base and regulation of the surface. It is subsequently applied to the adhesion promoter (bonding bridge) and the fiberglass mesh. Two coats are applied and can be colored. It is applied with a trowel.
30 LT. Resin component B of the Microcement
It is a resin that is used to mix with the microcement (base or fine) and will give the ideal creamy texture to apply it with a trowel. Can be colored.
Dose of the color chosen in our color chart, to color 5/10 LT of resin component B of the microcement. Once the resin is colored, it will give color to the base or fine microcement.
3 LT of Adhesion Promoter;
It is a single-component primer that serves to promote the adherence between the surface and the microcement, as a bonding agent. It is applied with a paint roller with the fiberglass mesh . The drying time takes 20-30 minutes depending of the moisture area. The Coverage is 100 grams per 1 m2 (1 layer)
6 LT of Epoxy Adhesion Promoter;
It is a two component epoxy primer that serves to promote the adherence between the surface and the microcement, as a bonding agent. It is applied with a paint roller with the fiberglass mesh . The drying time takes 10-12 hours depending of the moisture area. Coverage 200 grams per 1 m2 (1 layers)
3 LT of Sealant first filler
It is a monocomponent acrylic and water-resistant sealer, which is previously applied to Polyurethane Varnish. Two coats are applied. Drying time about 90 minutes depending on the ambient humidity. Consumption 1 LT / 10 m2 (2 layers)
3 LT of Polyurethane Varnish Sealer;
Two-component polyurethane varnish waterbased sealer. Must be applied in two layers with a paint roller. It consists of 3 versions: Gloss, Satin, or Matte. Converage 100 grams per 1 m2 (2 layers)
4,5 LT of Sealant Two-component polyurethane varnish;
Two-component polyurethane varnish solvent based sealer. Must be applied in two layers with a paint roller. It consists of 3 versions: Gloss, Satin, or Matte. Coverage 140 grams per 1 m2 (2 layers)
30 m2 of fiberglass mesh;
Reinforcing mesh that serves to prevent cracks and to work at the same thickness. It is applied together with the adhesion promoter.
PDF application manual.