Complete pack to cover 10 square meters of surface with microcement, for floors, with two layers of microcement base , plus 2 layers of microcement fine, sealants, primers, application instructions, and tools.
Ideal offer for those who are new to Microcement.
Total net weight (50 kg.)
This product is no longer in stock
The kit consists of:
10 KG of fine Microcement;
The fine microcement, in which the last two colored coats are applied, and will give the final appearance before applying the sealing varnishes. It is applied with a trowel.
20 KG of Microcement Base;
It is a coarse-grained microcement that serves as the base and regulation of the surface. It is applied after the adhesion promoter (bonding bridge) and the fiberglass mesh. Two coats are applied and can be colored. It is applied with a trowel.
10 LT. Resin component B of the Microcement
It is a resin that is used to mix with the microcement (base or fine) and will give the ideal creamy texture to apply it with a trowel. Can be colored.
Dose of the color chosen in our color chart, to color 10 LT of resin component B of the microcement. Once the resin is colored, it will give color to the base or fine microcement.
2 LT of Epoxy Adhesion Promoter;
It is an epoxy primer that serves as a bonding bridge, that is, a bond between the surface and the material. It is applied together with the fiberglass mesh and the roller is used to apply it. Drying time 12 hours depending on ambient humidity. Consumption 0.200 grams LT / 1 m2 (1 layers)
2 LT of Sealer first filler;
It is a single-component acrylic and waterproofing sealant, which is previously applied to Polyurethane Varnish. Two coats are applied. Drying time about 90 minutes depending on the ambient humidity. Consumption 1 LT / 10 m2 (2 layers)
1.5 LT of Sealant Two-component polyurethane varnish;
Bi-component polyurethane varnish. Two coats are applied with a roller. It consists of 3 versions: Gloss, Satin, or Matte. Consumption 140 grams / 1 m2 (2 layers)
10 m2 of fiberglass mesh;
Reinforcing mesh that serves to prevent cracks and to work at the same thickness. It is applied together with the adhesion promoter.
Tools included in the 10 m2 kit:
1 drill whisk rod
Roller 16 Cm;
1 small steel trowel;
40/60 grit sandpaper;
Grit sandpaper 120/150;
PDF application manual.