Complete pack to cover 20 square meters of surface with microcement, for walls, with two layers of microcement base, plus 2 layers of fine microcement, sealants, primers, application instructions,
Total net weight (85 kg.)
This product is no longer in stock
The kit consists of:
15 KG of Fine Microcement
It is a fine-grain microcement, in which the last two colored coats are applied, and will give the final appearance before applying the sealing varnishes. It is applied with a trowel.
40 KG of Microcement Base
It is a coarse-grained microcement that serves as the base and regulation of the surface. It is subsequently applied to the adhesion promoter (bonding bridge) and the fiberglass mesh. Two coats are applied and can be colored. It is applied with a trowel.
20 LT. Resin component B of the Microcement
It is a resin that is used to mix with the microcement (base or fine) and will give the ideal creamy texture to apply it with a trowel. Can be colored.
Dose of the color chosen in our color chart, to color 5/10 LT of resin component B of the microcement. Once the resin is colored, it will give color to the base or fine microcement.
2 LT Adhesion Promoter
It is a single-component liquid that serves as a bonding bridge, that is, a bond between the surface and the material. It is applied together with the fiberglass mesh and the roller is used to apply it. Drying time approximately 20 minutes depending on the ambient humidity. Consumption 1 LT / 10 m2 (2 layers)
2 LT of Sealant first filler
It is a monocomponent acrylic and water-resistant sealer, which is previously applied to Polyurethane Varnish. Two coats are applied. Drying time about 90 minutes depending on the ambient humidity. Consumption 1 LT / 10 m2 (2 layers)
2 LT of Polyurethane Varnish Sealer;
Two-component polyurethane varnish. Two coats are applied with a roller. It consists of 3 versions: Gloss, Satin, or Matte. Consumption 1 LT / 10 m2 (2 layers)
20 m2 of fiberglass mesh;
Reinforcing mesh that serves to prevent cracks and to work at the same thickness. It is applied together with the adhesion promoter.
PDF application manual.