Kit microcement 10 m2 for walls

New product

Complete pack to cover 10 square meters of surface with microcement, for walls, with two layers of microcement base, plus 2 layers of fine microcement, sealants, primers, application instructions, and tools
Total net weight (46 kg.)


More details

232,32 €

More info

The kit consists of:

10 KG of Fine Microcement;

It is a fine-grain microcement, in which the last two colored coats are applied, and will give the final appearance before applying the sealing varnishes. It is applied with a trowel.

20 KG of Microcement Base;

It is a coarse-grained microcement that serves as the base and regulation of the surface. It is applied after the adhesion promoter (bonding bridge) and the fiberglass mesh. Two coats are applied and can be colored. It is applied with a trowel.

10 LT. Resin component B of the Microcement

It is a resin that is used to mix with the microcement (base or fine) and will give the ideal creamy texture to apply it with a trowel. Can be colored.

; Pigments;

Dose of the color chosen in our color chart, to color 5 LT of resin component B of the microcement. Once the resin is colored, it will give color to the base or fine microcement.

1 LT of Adhesion Promoter;

It is a single-component liquid that serves as a bonding bridge, that is, a grip between the surface and the material. It is applied together with the fiberglass mesh and the roller is used to apply it. Drying time approximately 20 minutes depending on ambient humidity. Consumption 1 LT / 10 m2 (1 layer)

1 LT of Sealer first filler;

It is a single-component acrylic and waterproofing sealant, which is previously applied to Polyurethane Varnish. Two coats are applied. Drying time about 90 minutes depending on the ambient humidity. Consumption 1 LT / 10 m2 (2 layers)

1 LT of Polyurethane Varnish Sealer;

Bi-component polyurethane varnish. Two coats are applied with a roller. It consists of 3 versions: Gloss, Satin, or Matte. Consumption 1 LT / 10 m2 (2 layers)

10 m2 of fiberglass mesh;

Reinforcing mesh that serves to prevent cracks and to work at the same thickness. It is applied together with the adhesion promoter.

Tools included in the 10 m2 kit:

1 drill whisk rod

Roller 16 Cm;

1 small steel trowel;

40/60 grit sandpaper;

Grit sandpaper 120/150;

PDF application manual.



Product reviews