Kit Microcement 5 m2 for walls

New product

The kit consists: 0.5/1 L adhesion Promoter;  5m2 fiberglass mesh; 10 KG Microcement for first 2 layers; 5 KG of Microcement for 2 last layers; 5 L comonetnt B resin; 1 color pigment; 0.5 L primer sealer  ; 0.6 L 2C polyurethane sealant; 1 mixing rod, 1 paint roller, sandpaper and instruction manual.

Total net weight (23 kg.)

To see an enlarged image of the colors, click HERE

More details

180,29 €

  • DRY: bedroom, living ....
  • WET: bathrooms, kitchens...
  • Matt
  • Satin

More info

The kit consists of:

5 KG of Microcement Fino;

It is a fine-grain microcement, in which the last two colored coats are applied, and will give the final appearance before applying the sealing varnishes. It is applied with a trowel.

10 KG of Microcement Base;

It is a coarse-grained microcement that serves as the base and regulation of the surface. It is applied after the adhesion promoter (bonding bridge) and the fiberglass mesh. Two coats are applied and can be colored. It is applied with a trowel.

5 LT. Resin component B of the Microcement;

It is a resin that is used to mix with the microcement (base or fine) and will give the ideal creamy texture to apply it with a trowel. Can be colored.

Pigments;

Dose of the color chosen in our color chart, to color the resin component B of the microcement. Once the resin is colored, it will give color to the base or fine microcement.

Dry Areas:

0,5 LT of Adhesion Promoter;

It is a single-component primer that serves to promote the adherence between the surface and the microcement, as a bonding agent. It is applied with a paint roller with the fiberglass mesh . The drying time takes 20-30 minutes depending of the moisture area. The Coverage is 100 grams per 1 m2 (1 layer)

Wet Areas:

1 LT of Epoxy Adhesion Promoter;

It is a two component epoxy primer that serves to promote the adherence between the surface and the microcement, as a bonding agent. It is applied with a paint roller with the fiberglass mesh . The drying time takes 10-12 hours depending of the moisture area. Coverage 200 grams  per 1 m2 (1 layers)

0,5 LT of Sealer first filler;

It is a single-component acrylic and waterproofing sealant, which is previously applied to Polyurethane Varnish. Two coats are applied. Drying time about 90 minutes depending on the ambient humidity. Consumption 1 LT / 10 m2 (2 layers)

0,6 LT of Sealant Two-component polyurethane varnish plus ;

Two-component polyurethane varnish water based sealer. Must be applied in two layers with a paint roller. It consists of 3 versions: Gloss, Satin, or Matte. Coverage 120 grams per 1 m2 (2 layers)

5 m2 of fiberglass mesh;

Reinforcing mesh that serves to prevent cracks and to work at the same thickness. It is applied together with the adhesion promoter.

Tools included in the 5 m2 kit:

1 drill whisk rod

Roller 16 Cm

40/60 grit sandpaper

Grit sandpaper 120/150

PDF application manual.

To see an enlarged image of the colors, click HERE

Trusted Shops Reviews

Accessories

Download

INDICAZIONI PER SUOLI

INDICAZIONI PER SUOLI CON FOTOS

Download (121.58k)

INSTRUCTIONS FOR WALLS

INSTRUCTIONS FOR WALLS PHOTOS

Download (95.84k)

INSTRUCTIONS FOR FLOORS

INSTRUCTIONS FOR FLOORS PHOTOS

Download (120.7k)