Kit microcement 20 m2 for walls

New product

The kit consists: 2-4 L adhesion Promoter;  20 m2 fiberglass mesh; 40 KG Microcement for first 2 layers; 15 KG of Microcement for 2 last layers; 20 L component B resin; 2 color pigment; 2 L primer sealer  ; 2,4 L 2C polyurethane sealant; and instruction manual.

Total net weight (85 kg.)

To see an enlarged image of the colors, click HERE

More details

491,26 €

More info

The kit consists of:

15 KG of Fine Microcement
It is a fine-grain microcement, in which the last two colored coats are applied, and will give the final appearance before applying the sealing varnishes. It is applied with a trowel.

40 KG of Microcement Base
It is a coarse-grained microcement that serves as the base and regulation of the surface. It is subsequently applied to the adhesion promoter (bonding bridge) and the fiberglass mesh. Two coats are applied and can be colored. It is applied with a trowel.

20 LT. Resin component B of the Microcement
It is a resin that is used to mix with the microcement (base or fine) and will give the ideal creamy texture to apply it with a trowel. Can be colored.

Liquid pigments
Dose of the color chosen in our color chart, to color 5/10 LT of resin component B of the microcement. Once the resin is colored, it will give color to the base or fine microcement.

Dry Areas:

2 LT of Adhesion Promoter;

It is a single-component primer that serves to promote the adherence between the surface and the microcement, as a bonding agent. It is applied with a paint roller with the fiberglass mesh . The drying time takes 20-30 minutes depending of the moisture area. The Coverage is 100 grams per 1 m2 (1 layer)

Wet Areas:

4 LT of Epoxy Adhesion Promoter;

It is a two component epoxy primer that serves to promote the adherence between the surface and the microcement, as a bonding agent. It is applied with a paint roller with the fiberglass mesh . The drying time takes 10-12 hours depending of the moisture area. Coverage 200 grams  per 1 m2 (1 layers)

2 LT of Sealant first filler

It is a monocomponent acrylic and water-resistant sealer, which is previously applied to Polyurethane Varnish. Two coats are applied. Drying time about 90 minutes depending on the ambient humidity. Consumption 1 LT / 10 m2 (2 layers)

2,4 LT of Sealant Two-component polyurethane varnish;

Two-component polyurethane varnish solvent based sealer. Must be applied in two layers with a paint roller. It consists of 3 versions: Gloss, Satin, or Matte. Coverage 120 grams per 1 m2 (2 layers)

20 m2 of fiberglass mesh;
Reinforcing mesh that serves to prevent cracks and to work at the same thickness. It is applied together with the adhesion promoter.

PDF application manual.

To see an enlarged image of the colors, click HERE

Trusted Shops Reviews

Accessories